Go Green

Solvent and Waterborne Gun Washers

Solvent and Waterborne Gun Washers

Uni-ram’s Cascade automatic spray gun cleaners clean the interior and exterior of spray booth guns and pots in less than 60 seconds.

Economy Models:

Automatic Wash:

Getting Ready For The Next Paint Job is Quick and Easy with AUTOMATIC WASHING:

  1. Load the Stainless Steel Tank with dirty guns and pots.
  2. Activate the wash, simply by turning one Timer. In less than 60 seconds, your guns and pots are clean and ready for action. Streams of solvent from jets and nozzles wash paint from the inside and outside of guns and pots.
  3. Wash Solvent returns to Wash Pail for reuse.

UG 110:

  • Cleans 1 Spray Gun and Pot using Wash Timer
  •  9 Swirl Action Jets
  • Tank Size 12.5 x 12 x 13.5 (WDH”)

UG 2000D:

  • Cleans 2 Spray Guns and 2 Pots Using Wash Timer
  • 14 Swirl Action Jets
  •  Tank Size: 17.25 x 13.5 x 14.25 (WDH”)
  • Cabinet with Door and Floor

All models feature:

  • Wash cycle powered by a heavy-duty dual diaphragm pump, complete with air pressure regulator.
  • CE approval and Factory Mutual (FM) approval on popular models.
  • Automatic shut off when lid is raised.
  •  A quick disconnect on the suction pipe for quick removal of the pail.
  • Cleaning tanks, suction pipe, delivery tubes and rinse pump constructed from corrosive resistant stainless steel.
  • Effective cleaning of PPS Adapter.

Spray Gun Cleaners:

  • Clean spray guns automatically in under 60 seconds
  • Enhanced Cleaning cycle consists of Wash, Air Flush, Clean Rinse (100cc) and Air Flush 
  • Clean 2 Spray Guns and 2 Pots
  •  14 Swirl Action Jets

Standard Features:

  • Built-in Vent for automatic fume extraction with Vent Control.
  • Non-corrosive HDPE Pail.

UG 400D:

  • Manual cleaning using flow-through brush; clean solvent flow activated by foot pedal
  • Tank Size: 17.25 x 13.5 x 14.25 (WDH”)
  •  One wash pail on floor inside cabinet

UG 6000E

  • Manual wash using a flow-through brush to clean outside of spray booth gun, spigot to clean inside of spray booth gun
  • Regulated solvent flow to the brush and spigot is pump-driven and activated by separate foot pedals  
  • “Combo Ready” (ready for connection to a Uni-ram “EP2” Series Solvent Recycler)

The UG6000E goes beyond the UG4000E:

  • Larger Tank Size: 20 x 17 x 14.25 (WDH”) vs. 17.25 x 13.5 x 14.25 (WDH”)
  • 18-gauge polished stainless steel body vs. 22-gauge
  •  Enhanced manual cleaning

UG 7500E (Top of the Line):

  • Wash and rinse spray guns manually above large, conveniently located sink
  • Manual wash with wash solvent using flow-through brush
  • Clean-rinse guns using flexible spigot
  • Control overhead venting with On/Off switch
  • Clean guns automatically in the stainless steel tank (left side) 17.25 x 13.5 x 15 (WDH”)
  • “Combo Ready” (ready for connection to a Uni-ram “EP2” Series Solvent Recycler)

Accessories included with all Gun Cleaners:

  • Adapter tube for pressure fed and gravity guns
  • Trigger holding clamp and a knurled nut to prevent solvent entering air passage of spray booth gun
  • Adapter tube for effective cleaning of PPS Adapter
  • Operator’s manual

Specialty Models:

  • UG7500LE: UG7500 with whip line and spray-out card for testing spray booth paint pattern.
  • UGP10: For cleaning 2 quart (2L) pressure pot systems. Disconnect the lid. Place lid-hose-spray gun assembly and tank into cleaner. Initiate wash and rinse cycle.
  • UGP20: Cleans most 2.5 gal pressure pots and spray guns. Tank size is 17.25 x 13.5 x 20 (WDH”) UG3000DA UG2000 with air purge.
  • UG5000: Two tanks - equivalent to the UG4000D in one tank and the UG3000DA in the other.
  • UG6000EH: UG6000E with hose cleaning.

THE COMPLETE SOLUTION FOR CLEANING SPRAY GUNS: The Uni-ram Spray Gun Cleaner with Automatic Solvent Recycling:

A Uni-ram Recycler eliminates the need to haul dirty solvent off-site for disposal, providing a “GREENER” shop operation.

  • A solvent recycler provides clean solvent every day. Clean solvent washes spray guns better and faster.
  • Eliminates unnecessary solvent purchases. Dramatically lowers solvent purchase and disposal costs.
  •  Recycles solvent from the spray gun cleaner at the press of a button; easy to use.
  • Continue to clean spray guns while the recycler operates.
  • Recycler certified to UL Standard 2208 and CSA 22.2, No. 30 and No. 38. Approved for use in non-hazardous and in hazardous locations, Class1, Division 1, Group D.

URS500EP2 (High Performance Solvent Recycler):

  • Fast cook times 4-6 hrs
  • Effective waste residue
  • Power supply: 120 V, 1500 W heater
  • Recycles 5 gal (20L)

COMBO655 (All-in-One Stainless Steel Cabinet):

  • Smaller footprint
  • 120V, 1500W, 5 gal high performance recycler
  • Gun cleaning has features of the model UG6500E

COMBO5E75 (Top-of-the-line Spray Gun Cleaner):

Comes with manual and automatic wash and rinse features.


Shop Operations are “GREENER” with the Uni-ram Spray Gun Cleaner:

Health and Safety Benefits:

  • CE Certified and popular models are UL approved.
  • Safety Switch terminates cleaning cycle when lid is raised.
  • Automatic cleaning is “Hands Free.” Operator has minimal exposure to solvent. The solvent pail is kept inside the cabinet.
  • Most models have a built-in vent for automatic fume extraction.

Environmentally Friendly:

  • Wash solvent is re-used until dirty.
  •  Dirty solvent can be recycled using one of Uni-ram’s family of Solvent Recyclers.

Automatic Cleaning Has Moved ahead of Cleaning By Hand:

  • Cleaning spray booth guns is faster and easier.
  • Cleaning is “Hands Free” - less contact with solvent.
  • Staff enjoy cleaning with Uni-ram Gun Cleaners.
  • Solvent consumption is lower by up to 90% (Solvent is re-used and can be recycled).
  • Lower solvent use means lower solvent cost and a “GREENER OPERATION.”

Description: Top-loading automatic Spray Gun Cleaner

Items Cleaned: Spray booth guns (siphon, pressure, gravity feed) and pots

Power Supply: Compressed air at a minimum of 85 PSI, 2 CFM

Compatibility: Solvent or aqueous cleaners

*Uni-ram invented the automatic spray gun cleaner in 1988. Shipments to Collision Repair Shops in 30 countries exceed 40,000 units. Distributors include Sata of Germany and Iwata of Japan. Dealerships for all car manufacturers and the US government under stocking number NSN 4940-21-921-1555 use Uni-ram Spray Gun Cleaners.


Uni-ram Spray Gun Cleaners for Waterborne Paints:

UM120W:

The UM120W is equipped with cleaning tools to effectively clean paint from the spray gun.

  • Wash gun delivers high pressure water to clean the paint channel.
  • Flow-through brush removes paint from the outside of the gun.
  • Air gun dries the spray gun and a spray out verifies a clean paint channel.

The “GREEN” Water Recovery System features filtering after treatment with Uni-ram’s flocculating agent, COAG-KLEEN FP. Recovered clean water may be disposed of or reused, minimizing water consumption.


UG7500W:

Painters that prefer automatic cleaning, select the UG7500W. Spray guns are washed automatically using Uni-ram’s effective water cleaner, AQUA-KLEEN PGC then rinsed with water and dried with air. The cleaner is recycled using a Uni-ram liquid recycler when>dirty for continued use, minimizing consumption.


UG5000W:

The UG5000W combines the features of the UM120W to manually clean waterborne spray guns and the UG4000 to automatically clean solvent spray guns.

Powerful Dual Diaphragm Pump Pumps 2 gal per min. Unit comes complete with pressure regulator.


WARRANTY:

One year warranty on parts and labor and 2 year replacement warranty on the diaphragm pump.

Dimensions and Weight:

  • UM120W: 19” w x 22” d x 46” h, 72lb / 33kg
  • UG5000W: 47” w x 17” d x 46” h, 170lb / 77kg
  • UG7500W: (including skid) 38” w x 26” d x 68” h, 200lb /91kg

*Uni-ram is expert in water borne spray gun cleaning and “GREEN” water recovery systems. Over 30,000 customers have bought Uni-ram spray gun cleaners worldwide.